Download flexiWANΒΆ

Downloads are available in several formats from the below section. Each image or a virtual appliance has readme file, with instructions regarding credentials and network interfaces layout.

ISO Installer Release 6.3.35

flexiWAN offers installer images for installing on bare-metal. ISO Installer will create a recovery partition for offline restore. The installer supports serial console and VGA output, selection available at the initial boot menu. UEFI is required.

Default username and password are: admin / flexiwan

Serial settings:

  • Baud Rate - 115200
  • Data Bits - 8
  • Parity - None
  • Stop Bits - 1
  • Flow Control - off

flexiEdge.focal.6.3.35.iso.zip

SHA256: dd0560009b9872f18c94af46c550221d33b558f6de2381479defadb3e3c350e4

VMware Release 6.3.35

A pre-built flexiEdge appliance for VMware Workstation. All VMware products such as Workstation, Fusion and Player are supported. For ESXI installation, use the ISO installation file. flexiEdge appliance is available in OVA format for an easy deployment. Appliance use UEFI.

Default username and password are: admin / flexiwan

flexiEdge.focal.6.3.35.VMWare.ova.zip

SHA256: fc8869f47fda2c7f113b5c320476e555fef5a82d3dda4f7f364095e5e4286a60

KVM/QEMU Release 6.3.35

Pre-built flexiEdge appliances for KVM/QEMU UEFI and VGA.

Default username and password are: admin / flexiwan

flexiEdge.focal.6.3.35.qcow2.zip

SHA256: 5b96c3410750ebbc7648af75aa938135e4aa5ae87764f2c54ff8aeca165c30f7


Pre-built flexiEdge appliances for KVM/QEMU UEFI and Console.

Default username and password are: admin / flexiwan

flexiEdge.focal.6.3.35.console.qcow2.zip

SHA256: a23addce8d5c0cb9715c5d058bd1aa2c1f1756431646d881352011feb34db816


Pre-built flexiEdge appliances for KVM/QEMU BIOS and Console.

Default username and password are: admin / flexiwan

flexiEdge.focal.6.3.35.console.bios.qcow2.zip

SHA256: 0e7e4f2a4210b191d909b1fc92fa41d923c6cabf85b6a5731f86d944020f6519

Virtualbox Release 6.3.35

A pre-built flexiEdge appliance for Oracle VirtualBox UEFI.

Default username and password are: admin / flexiwan

flexiEdge.focal.6.3.35.VBox.ova.zip

SHA256: df94552bc14be934528b85c5786cb50cd82e7f720cea24c0d957d1186a59e49c


A pre-built flexiEdge Virtualbox raw image.

Default username and password are: admin / flexiwan

flexiEdge.focal.6.3.35.vdi.zip

SHA256: f84a8a357bf74b08f974bf88f96a1775a2ed690cf6cd8d02da6d82dc035f83b5

The flexiWAN software is tested on many hardware configurations and hypervisors. Make sure to install flexiWAN on asupported hardware as described in the system requirements page. In case of running into any technical issues or have questions, visit our Users Forum or contact our support for assistance at yourfriends@flexiwan.com.